BALL END MILLS (4F)
| CODE NO | Radius of Ball Nose |
Diameter | Length of Cut | Overall Length | Shank Dia |
| R | ΦD | L1 | L | Φd | |
| BEMA 4020 | R1.0 | 2.0 | 5 | 50 | 6 |
| BEMA 4025 | R1.25 | 2.5 | 6 | 60 | 6 |
| BEMA 4030 | R1.5 | 3.0 | 8 | 60 | 6 |
| BEMA 4040 | R2.0 | 4.0 | 8 | 60 | 6 |
| BEMA 4050 | R2.5 | 5.0 | 10 | 78 | 6 |
| BEMA 4060 | R3.0 | 6.0 | 12 | 78 | 6 |
| BEMA 4070 | R3.5 | 7.0 | 14 | 90 | 8 |
| BEMA 4080 | R4.0 | 8.0 | 14 | 90 | 8 |
| BEMA 4090 | R4.5 | 9.0 | 18 | 100 | 10 |
| BEMA 4100 | R5.0 | 10.0 | 18 | 100 | 10 |
| BEMA 4110 | R5.5 | 11.0 | 22 | 106 | 12 |
| BEMA 4120 | R6.0 | 12.0 | 22 | 106 | 12 |
| BEMA 4140 | R7.0 | 14.0 | 26 | 106 | 14 |
| BEMA 4160 | R8.0 | 16.0 | 30 | 130 | 16 |
| BEMA 4180 | R9.0 | 18.0 | 34 | 140 | 18 |
| BEMA 4200 | R10.0 | 20.0 | 38 | 160 | 20 |
